Baby Crib Mobile Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Baby Crib Mobile Arm optimized for IKEA GULLIVER and SNIGLAR It should work on any Crib. in 2 sizes and parametric.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 105
- Makes
- 0
- Views
- 1,273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
V2 update:
I needed the arm to be a bit taller, so I had to make it in 2 parts to fit in my printer. The design is parametric, if you have access to fusion, you can open and adjust the variables to make it fit.
To attach the 2 parts you can either use a large wood screw, or an M5. I had better lock with wood screw. I sanded the bed side of the part with a course sand. Print it with Mat PLA, it's easier to sand.
V1:
I have 2 sizes already exported, one for a 300x300 bed size and one for 250x250.
You can open the parametric file and adjust it to your liking, the picture is the medium size.
It attaches securely using a simple screw and washer. I printed in Matt PLA.
The design is optimized for easy printing and good bed adhesion, so one side has a slight flat side. depending on where on the bed you're mounting it, you can flip it so the “bad” side can be hidden.
The round profile can be changed to a square profile in the parametric file.