1 / 1
Voron Trident Z Carriage for MGN12C Linear Rails
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remodeled Voron Trident Z Carriages to fit MGN12C and MGN12H Rails
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
I'm reusing old MGN12C rails for Z axis instead of MGN9H, Keemo already changed original models, but it's for MGN12H. Holes are spaced 15mm instead of 20mm on C carriages so I've added extra holes for those.
Use "[a]_z_carriage_left" and “[a]_z_carriage_right” from original remade models. As with original remade models, MGN12C carriages are wider than extrusions so use thick tape 4-5mm for your side panels.