Depressor Mount for Sovol SV08
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Depressor mount for Sovol Sv08 modified withT track support
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 1072
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a remix of the beefy_depressor_mount.stl from the FilamATrix project. The SV08 doesn't have the linear rails on top like a traditional voron 2.4 would but instead have the rails underneath and threaded through the aluminum extrusion. The aluminum extrusion does still allow for traditional t-nuts on the sides so I utilized that for my mounting point.
My remix makes the depressor mount a little thicker and adds a right angle support (with holes) to fit two M4x8 button head screws and M4 t-nuts. I used the following t-nuts.
Note: This does clear the official enclosure without issues.