1 / 4
Bulldog Clip - Bag Clip/Kitchen Clip/Grip/Peg/Wide Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printable Bulldog Clip with PETG Spring, simple and printable in less than an hour! Part of a series.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 263
- Wydruki
- 3
- Wyświetlenia
- 834
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (0)Kolekcje (33)Powiązane
This is a wider version of my simple clip that utilises a printable spring to hold both parts closed - In this variant, it's probably best suitable for use as a bulldog clip, but it has considerable grip and could be used to close large bags in the kitchen as-well.
Printing Notes
- This is best printed in PETG as the spring needs to be deformed and held under tension, I think PLA would break.
- The Clip - print at 100% in-fill, side-on - this way the layer lines provide strength.
- The Sides - print flat-side down, they're universal, print 2 of them - I printed in Prusaslicer with adaptive layers on, Quality/Speed 0.62, with smooth radius set to 5 and they came out well.
Assembly
- Line the 2 sides up together, using the locating pins on the pivot.
- Grab the clip and slide down from the rear over the middle section until the clip snaps into it's locating slot - this WILL take some considerable force - but it's necessary to ensure there's some decent grip from the clip.