1 / 4
Bulldog Clip - Bag Clip/Kitchen Clip/Grip/Peg/Wide Clip — image 1
1 / 4

Bulldog Clip - Bag Clip/Kitchen Clip/Grip/Peg/Wide Clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A fully printable Bulldog Clip with PETG Spring, simple and printable in less than an hour! Part of a series.

Rating
5 / 5
Likes
31
Downloads
263
Makes
3
Views
841
Reviews
3

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This is a wider version of my simple clip that utilises a printable spring to hold both parts closed - In this variant, it's probably best suitable for use as a bulldog clip, but it has considerable grip and could be used to close large bags in the kitchen as-well.

Printing Notes

  • This is best printed in PETG as the spring needs to be deformed and held under tension, I think PLA would break.
  • The Clip - print at 100% in-fill, side-on - this way the layer lines provide strength.
  • The Sides - print flat-side down, they're universal, print 2 of them - I printed in Prusaslicer with adaptive layers on, Quality/Speed 0.62, with smooth radius set to 5 and they came out well.

Assembly

  • Line the 2 sides up together, using the locating pins on the pivot.
  • Grab the clip and slide down from the rear over the middle section until the clip snaps into it's locating slot - this WILL take some considerable force - but it's necessary to ensure there's some decent grip from the clip.

Tags