1 / 2
CREALITY K1 | K1C | K1SE - SIDE PANELS WITHOUT LOGO [CLOSED + SPOOL HOLDER] — zdjęcie 1
1 / 2

CREALITY K1 | K1C | K1SE - SIDE PANELS WITHOUT LOGO [CLOSED + SPOOL HOLDER]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.

 

*There is a version made for the K1 SE that allows keeping the original reinforcements that come with the printer.

 

/////ATTENTION 

*The assembly guide is available as a PDF at the bottom of the files section.

NAME - SIDE_PANEL_WITHOUT_LOGO_K1C_K1_K1SE_GUIDE

______________________________________________________________________________________________________________

/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate links

INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw

HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/4imGAQW

HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4

FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://amzn.to/3G3Z1wr

FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/43JeThP

FLAT HEAD SOCKET CAP M3 6mm-16mm (BLACK): https://amzn.to/4kRgQNP

________________________________________________________________________________________________________________

If you use the version with the sensor repositioning, you need to INSTALL [4x] M3 D5 L5mm INSERTS ON WALL 2 on the left side.

 

*Given the size of the pieces, you'll need to adjust the supports to [SNUG] in OrcaSlicer or print the pieces with the front face down. This reduces the number of supports needed and ensures the pieces fit within the print area.


/////DESCRIPTION

K1 | K1C | K1 SE HONEYCOMB CLOSED SIDE PANELS

This project aims to replace the printer's side panels.
It’s an alternative solution for those with the K1 SE who want to enclose the printer’s sides.
 

The project parts should be printed in ABS or similar materials due to their resistance to high temperatures, ensuring durability and reliability.

Tagi