Wera 813 Holder for Gritfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gritfinity Storage for Wera 813
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have designed this box for holding the Wera 813 Bit driver.
It takes up 2 boxes in a Gritfinity rack, so its a 2x1 i would guess.
The first one i made to be around 45.5mm to fit inside the Parametric box design by Pred, and the screwdriver does not move around in the holder and is not able to fall out when in the box.
The Latest update is with the addition of 2x slots for 6mm bits to be included.
i use that for a 6 to 4mm bit adapter so i can change between bit sizes easily.
Print setting
- Infill 20%
- Layer Height 0.2 is fine. but for smooth finish use .16 or .008 !
- Printet in PLA & ABS Just fine no problems.
Let me know if you run into anything and i will do my best to help you out!
- The Box i designed V2 & V3 for:
https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric