Liczymy pasujące modele…
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Holds 2x10 cables, hole diameter 7.4mm
In the slicer, the pot and feets must be rotated until it fits into the print bed, it is very tight so that the shell can be printed as large as possible on an MK4 or MK3S+. A rotation of 27° or 333° fits on the print bed. No support is…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above Changelog 2022-07-14…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 1x3 units in footprint, full height, 2x1 partition grid compatible with Sortimo/Bosch/Auer/others…
This is a road interactive road board for mockups (with LCD 2x16). It is easy to install with 4 screws. In my mockup it is connected to Arduino uno R3 with a temperature sensor. dimensions: 9,5cm x 11cm x 2cm
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
I removed the gap in the switch cap, so it's easy to print upside down.
A new background using an improved panel system (4 foot x 2 foot size made of 8 x 8 inch panels with alignment biscuits) can be found here: https://www.thingiverse.com/thing:3564970 A "proof of concept" double sided aquarium background…
Includes holes for magnets that do not need supports. I printed this in PLA with a 0.6mm nozzle and 0.35mm layer height, which takes 2 hours, and looked great. Supports are optional for the large circle but having them led to a better…
Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
This upgraded version of the case keeps your bullets safe and covered. Fits better in your pocket thanks to its more oval shape. The clip that holds the lid in place is stronger. Tolerances in the model are increased.
This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.
faucet garden adapter 4 variants M22x1 faucet → quick coupling for hose M22x1 faucet → 1" ¾" & ½" outer thread use 6x3mm or similar gasket for quick coupling Print settings 5 walls 0.1mm layer 30% infill no supports
The fine thread M22x1 is often used for in house water taps. You need in addition a O-ring and a rubber gasket for the connection between adapter and the water tap. Printed with 0.12 layer height and in PETG.
A compact version of the source
After using "IQOS TEREA/HEETS 1x10 clip case 2019" we knew 10 bullets it's not enough. So here is a 2x10 catalog. Perimeters: 5
Simple M12x1,5 Cable Holder for Umbilical with Can-Bus. BOM: 1x M3x20 SHCS 1x M3x8 SHCS 2x Heat-Set Insert M3x5x4
Space for 6 wipers, 6 cutters and screws. Magnet/Screw holes use straight line bridges for cleaner overhangs. Not stackable as shorter gridfinity bin has been used so parts stick out when stored.
This business card holder is perfect for a desk drawer or Gridfinity-based desk organiser. Cards are stores at a slight angle, so overhang a little, but also can be seen quite easily if you have multiple cards side-by-side. It is designed…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This actually make great and silent fidgets. :) After a test print, I decided to take the knurling all the way to a point.…
In the absence of a phone holder that is simple, spends little material and gets the job done, I made this one. Works well to samsung S20 FE (with or without cover). Interested in Gridfinity?
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
M12x1.5 nut M12 cable glands need a 17mm wrench for the nut and a 15mm wrench for the gland itself. If you're operating in a tight space, a 15mm nut might help! If you need a specific size and you're not into FreeCAD that much, let me…
This was made to store my smaller Ryobi drill bits. But this can totally fit most, if not all, smaller drill bits. This model can hold a set of 20 drill bits comfortably and fits perfectly with the Gridfinity system.
A 2x1 version of @ChrisAeroEngineering 's Stackable Box
These are complete modular wall tiles from my Masterful Dungeon Tiles system. The wall tops are fully compatible with both 2x1 and 2x2 tile bases, giving you maximum flexibility. Whether you're lining a corridor or enclosing a room, the…
To make this you will need one Core, one Plug, one CubieWithCore, and three Cubies. Try 0,15 tolerance first, that's what worked best for me.
This print will allow you to use your Dell SE2419HR monitor with a VESA mount based monitor stand. This will be compatible with any Dell montor that uses the same metal pivot on the stand. To use: Detach base from existing monitor stand -…
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) The…
This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.
Battletech stackable miniature storage tray Small 2x2 and 2x1. Stores 4 and 2 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
A Gridinity bin (2x1) to fit 4 euro standard chargers.
Plate 2 x 12 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…
I liked the original file. However it did not meet the size and style of my existing spikes. I modified the 3 to 2 rows so I could fill the gaps I have.
Made specifically for this set of grinding bits https://www.amazon.co.jp/-/en/gp/product/B017D4GKT0/ref=ppx_od_dt_b_asin_image_s01
CanBus Umbilical m12X1.5 for SB2040 EBB36 Holder for cable gland M12x1.5 use m3x20
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
The interior walls are very thin and may appear to slice with gaps if you're using a 0.6 mm+ nozzle. Printed okay and does the job.
This is the modular 2x1 dungeon tile from my Masterful Dungeon Tiles system. Like the 2x2 version, it features a reusable base and a swappable top , letting you easily switch between different surface designs without needing to reprint…
printed using 100% infill
Need a base plate but don’t want to go full size? This smaller LEGO DUPLO-compatible version might be just what you’re looking for. Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 %…
Plate 2 x 10 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…
2x1 Gridfinity bin for storage of: 10x USB-A 2x USB-C 3x SD-Card 3x MicroSD card
2x1 Wall tiles, printed in ASA.
Plate 2 x 16 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…
Gridfinity 2x2x12 unit with 4 drawers The drawer fronts have a space for a 12 mm label. Optimized print profiles for Bambu Lab printers available here : MakerWorld
3D printable 3x bigger lego technic 2x1 beam with holes for pin and axle
Hex bit holder, gridfinity 2x1 bin. Print with 10% gyroid/grid infill and no support, slicer might suggest to fix an error in the .stl (if so then let prusa slicer auto do that by a simple right-click). It fits the Gridfinity universe, it…
Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
Uses the default 6x2mm magnets (optional) Use a sharpie to make the numbers easier to see Included step file for modification such as resizing magnet holes No supports Required
A support for 2x10 arrangement of 21700
Tlumič výstřelu s vnitřním závitem M12x1
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
2x1 Grid Battery Bins Gridfinity refined compatible. 12 AA ( + 2 AAA) or 26 AAA can be stored on 2x1 grid. The AA bin has bonus 2 AAA slots. Optional lids are provided. They are best printed with transparent filament. Then, you can count…
I wanted a gridfinity stand for my hex driver set . No supports needed and holes for glue in magnets. I remixed a bin from CWalters for the base
Added magnet holes. Magnet holes have square bridges for better bridging and no droopy rings. Printed at low resolution with: PLA+ 0.6mm Nozzle .28 Layer Height High speed No Ironing
This is for Zach Freedman's Gridfinity System. A Gridfinity 2x1 bin to hold a 19mm Electrical Tape (or Insulating Tape). With magnet holes. Enjoy!
I really liked the model, though it was edgy and not so ergonomic. I made the buttons larger with a rectangular-like shape, made type c hole bigger for using larger based cables and made the edges smoother. Added f3z file if you wanna…
A mini sized shift knob I designed for use in my Toyota MR2 roadster. This should be compatible with most older Toyotas and cars without a reverse lift mechanism on the shifter. Only exception I know of should be the GT86 / BRZ. This…
Calling all makers, builders, and dreamers! This free 3D printable Lego Brick Collection offers a complete range of 2x1 to 2x9 Lego-compatible bricks . Perfectly modeled for seamless fitting and smooth stacking, these bricks are ideal for…
Collection of screws (ISO 4762 / DIN 912) including : M12x 12, 16, 20, 25, 30, ,35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
I needed a simple way to mount 12mm pushbutton for a recent project ( foot switch ), so I made this. There are 2 versions (with 2 screw holes and 4 screw holes), each for m1.6 , m2 and m3 screws. I printed mine out of PLA and didn’t have…
4 Shift Knob variants with various textures. All M12x1.5 threading. Tested fitment on my MK3 Jetta and MK1 Jetta. May need adjustment or different threads for other vehicles. Print in ABS or another filament that can stand temperatures.…
Several years back, I built a modified golf cart with an ATV drivetrain/suspension and I originally used a Hurst pistol grip shift knob I had on my Mustang. I wanted to change it up to something more comfortable for the seating position…
For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
Slope 45 degree 2 x 1 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or…
Gridfinity bit holder with 16 hex slots and dedicated space for bit extender. Fusion 360 sources are included.
Baseplates for Gridfinity, with that satisfying magnetic snap, significantly thinner and cheaper than traditional magnet bases. Based on the proven Gridfinity Extended “Efficient Magnetic Base”, with a number of improvements: Uses 5x1mm…
Divided the original box into 3 segments to store my baking ingredients. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
Hopefully others will find this useful. It holds: 5 hex wrenches Scraper Screwdriver USB micro SD adapter Two nozzle cleaner needle holes Ender box wrenches Wrench for V6 heatblock Side cutters (designed for CHP-170 but works with…
Bigger - 2x1 drawer & body size (fits into "regular" 1x1 drawers) I really needed a bigger version of this great model, so I designed one! It provides additional support for long labels too. Make sure to print really slowly so it fits…
Venturi nozzle for compressor adapter with M12x1.25 threading I was able to print it without supports on a MK3S+.
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Update 05.12.24: Added new boxes for M4/M5/M6 screws ------------------------------------ M4x4 M4x6 M4x8 M4x10 M4x12 M4x16 M4x20 M4x25 M4x30 M4 Nuts M4 Washers M5x4 M5x6 M5x8 M5x10 M5x12 M5x16 M5x20 M5x25 M5x30 M5 Nuts M5 Washers M6x4…
Holds your GoPro with the battery door at the top, 4 microsd cards, and one extra battery
Collection of set screws (ISO 4028 / DIN 916) including : M12x 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Simple 12x12 Multiplication chart. I haven't printed it but I have a 10x10 that its printed already. it can be printed in 2 colors. 10x10 Multiplication chart https://www.prusaprinters.org/prints/26628
Small Wiring Junction box 22x15mm to fit 2.5A terminal strip with two connections.
I made this from scratch based on a model I tried from Hanes244. His was for the Mimi+ version and was too small for my tiles. This box in a 5x2 configuration and each slot holds 11 of the standard tiles. I have printed this and based on…
Simple holder for lathe tools 12x12mm and torx keys
Photo Frame - Picture Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid Update 07/05/2025: added Hex Polaroid 9x9 Frame_1 REV_C.stl, geometry cleanup Resize to adjust dimension If you download/enjoyed this file,…
Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
![Nut M12x1.5 [cable gland, Kabelverschraubung M12 x 1,5]](https://media.printables.com/media/prints/58596/images/5534175_4e949048-6d70-41c7-b47b-372342e3b1c0_b1030ddb-1236-4693-8475-29de9026c4d1/img20240103190349.jpg)
