Wardrobe Rod Support (18mm diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed support for 18mm wardrobe rods. Modify in slicer of Fusion 360. Requires supports, trim base after print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This is a support bracket for a wardrobe hanging rod. It might be compatible with some IKEA models, but I am non certain. Check the images to verify if this support matches your needs before downloading.
The bracket is designed for a rod with an 18 mm diameter. If you need to adjust it for a different size, you can modify the 3MF file using slicer tools. For example, you can draw addictional cylincrical bodies to cut and expand the rod slot. If you prefer a more precide modification, you can edit hte Fusion 360 parametric model directly.
I printed the support in PLA. To ensure strong structural integrity, I positioned it on the print bed as shown in the image, which requires the use of supports.
Important Notes:
After printing, you might need to remove the base of the support using a craft knife or blade if it remains attached to the main model. Refer to the image for the correct final appearance.
