Wardrobe Rod Support (18mm diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed support for 18mm wardrobe rods. Modify in slicer of Fusion 360. Requires supports, trim base after print.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 1
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
This is a support bracket for a wardrobe hanging rod. It might be compatible with some IKEA models, but I am non certain. Check the images to verify if this support matches your needs before downloading.
The bracket is designed for a rod with an 18 mm diameter. If you need to adjust it for a different size, you can modify the 3MF file using slicer tools. For example, you can draw addictional cylincrical bodies to cut and expand the rod slot. If you prefer a more precide modification, you can edit hte Fusion 360 parametric model directly.
I printed the support in PLA. To ensure strong structural integrity, I positioned it on the print bed as shown in the image, which requires the use of supports.
Important Notes:
After printing, you might need to remove the base of the support using a craft knife or blade if it remains attached to the main model. Refer to the image for the correct final appearance.
