4 Inch Duct Wall Pass Thru
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created this for Paint Booth to attach flexible hose on booth side thru the wall to hard duct on the other side.
- Ocena
- 4 / 5
- Polubienia
- 40
- Pobrania
- 325
- Wydruki
- 0
- Wyświetlenia
- 1586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed an attractive looking pass thru for my paint booth to the exhaust in the other room. Designed for 3 inch studs in wall, but made so would work with thicker walls. The coupler keeps the two inserts together inside the wall. The pieces fit together very snug, but no sanding should be required. PDF explains the parts and easiest way to assemble.
Found the Duct plate had two models in the .3mf. Fixed and also increased outer diameter of plate duct to minimize lip around 10mm up. And changed all to 0.2mm Quality profile.