BBSHD Motor Cut-off Magnet Holder for Shimano XT Brakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches the motor cutoff magnet onto the Shimano XT brake reach adjustment knob.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 1013
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Instead of gluing the magnet onto the end of my Shimano XT's brake adjustment knob, I came up with this design to conveniently hold the magnet at the proper distance from the cutoff sensor.
Printed with Polylite PETG, 0.2mm resolution and 100% infill. You can print with no supports if you put the spine on the bed but I found it's stronger if you print this vertically and add supports for the overhangs. You'll see what I mean when you get it into your slicer.
Depending on how accurate your printer is you may need to add a bit of glue to the magnet to ensure it stays in the holder.
Magnet: 10mm outer diameter 3mm height
Printer: Prusa i3 MK3S+
UPDATE: Thickened the back spine to strengthen it.