RatRig VC4 Bowden Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the routing of the bowdens to attach them to the toolhead wiring.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 548
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified the routing of the bowdens to attach them to the toolhead wiring.
You can print the bracket without supports. The hole for the bowden is 5mm, you can easily push a 4mm bowden through.
I also added a version with a 7mm hole for 6mm bowden.
You need at least 6 clips and if you want the brackets on each side of the printer, you need to mirror it for the left side.
The attached bracket is for the right side of the printer.
I used ABS because my VC4 is enclosed for high temp materials.
EDIT: added some VAOC compliant brackets as well, but you need to drill a 5mm hole through the frame for each bowden and drill a 1/8 thread for the push fittings into BowdenBracket2!!!