120mm sturdy fan covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really sturdy things for those who need it
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For one project needed a very sturdy fan protection that will connect 2 120mm fans and make a brick from those, so i made this.
Be aware that there could be some friction-spacing problems, and the connection could be not ideal.
Made this for id-cooling fans and they fit not perfectly, but some noname ones fit perfectly, so that really depends on some mm from time to time, but you will have an opportunity to use some force and everything will be ok.
Cover for one fan is not tested and made just cause i had time.
I printed the first level with only one wall and very low speed, it was easier for me.