1 / 6
Tchibo Beko Grundig SMEG Severin Oster gear — zdjęcie 1
1 / 6

Tchibo Beko Grundig SMEG Severin Oster gear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Coffe machine gears

Ocena
5 / 5
Polubienia
15
Pobrania
377
Wydruki
2
Wyświetlenia
1015
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

Hello !


If you like my work, please rate it.

 

My brother repairs coffee makers as a hobby. A regular problem in a Tchibo Esperto coffee machine is that these gears break.
Often, aftermarket gears don't last long either. That's why when he ordered it, I drew it for him.
As it turned out, these gears also occur in other coffee makers:

-Tchibo Esperto Series

-Beko CEG 5301

-Grundig KVA 4830

-SMEG BCC01, BCC02

-Severin KV 8090

-Oster BVSTEM8100
I haven't tried it with a resin printer, only with FDM.

PETG and CF PLA broke quickly. I haven't tried ABS. Nylon filament holds up well. The support shown in the pictures worked for me.
4-wall thickness, 0.2mm layer height, 100% infill.
Slower printing and lower layer height increases layer adhesion.
I printed the nylon material at 245 degrees on a Buildtak Nylon+ surface with a bed temperature of 60 degrees.

There is a pin inside the larger gear. It is necessary because it presses a switch.

Bb.

Tagi