Geekvape Aegis legend 2 510 connector repair
Geekvape Aegis legend 2 510 connector repair
- Pobrania
- 793
- Polubienia
- 16
- Ocena
- 4,75
149 modeli
Geekvape Aegis legend 2 510 connector repair
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…
Replacement for the clip to the slider in the IKEA Kvartal system (not longer produced by IKEA). Latest Update: 2022 Feb: Additional tweaks to increase stability Print instructions Material: PLA or PETG Layerheight: 0.15 mm Nozzle: A…
This is another model from my Vapor's World collection . The stand prevents accidental tipping of the mod. No support required. I am looking forward to your Makes! :-) If you like this model, feel free to check out my others here .
A Tank replacement for the Geekvape made out of PETG. I"m using it for a year now. depending on your printer you might scale it in Z achsis about 1% or so. the fiddeling between its to large, and you don't get it in, and its to loose and…
lost my tip and made a new one so you don't have to. best on a resin printer but probably print on any style printer. you will need o-rings for the base it is designed for them like the original. all files included so you can mod it as…
Simple hook (in four lengths from 10 - 40 mm) for the holes of the IKEA Elvarli connecting post/pillar. Simply hang in the hole and if desired firmly fix with the safety clip. Thus, unintentional sliding out is no longer possible and the…
A Drip Tip for the Geekvape Zeus Atomizer Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,1-0,2 Infill: min Notes: Print upside Down to avoid using Support Category: Other
This is another model from my Vapor's World collection . This belt holder for Geekvape Aegis Legend 2 is a practical solution for hands-free convenience while keeping your vape device secure and close at hand. Fits belts up to 40mm wide…
A Drip Tip for Geekvape Blitzen. Printed mine in 0.08 Category: Other
This is a anti-tip thing for Ikea Bekvaem stool and the Ikea learning tower hack consisting of Bekvaem and Oddvar. Compared to the original design: Added smooth radius Reduced wall-thicknesses Added smaller parts for the back, which is…
END Cap for IKEA KVARTAL (older System) This one is a little bit fixed, but the original ist to loose
Geekvape doesnt offer suct spare part so i printed mine using PETG (I ran out of ABS) It can handle the heat generated by the atomizer. It needs abit more post processing for screws and to fit in the baseplate in the mod to make it snug
Ersatzteil an den Original Wagen angepasst
Dust sucks, especially when vaping. That's why I created a simple cover for the GeekVape Zeus vaporizer. The cover has a diameter of 20mm and is 10mm high with a wall thickness of 1mm. Theoretically it should also fit many other…
Have fun printing it! On my panelslide it works fantastic. I reccomend printing it with 100% Infill standing on one of the short edges Category: Replacement Parts
Since IKEA discontinued the IKEA KVARTAL brackets I created a good fitting replacement. Printed in PLA with support (~25min print)
Replacement for the IKEA Kvartal curtain rail sliders which you can't buy anywhere. Prints easy without supports.
This is another model from my Vapor's World collection . Adapter for Geekvape Aegis Legend 2 that fits into the can holder of your car. There exists an improved version 2 Dimensions Diameter at the bottom: 65mm Diameter on top: 80mm…
This is another model from my Vapor's World collection . Adapter for Geekvape Aegis Legend 2 that fits into the can holder of your car. The 2nd version is an improvement in that the buttons on the mod no longer make contact with the…
Recently I found myself in a situation. I needed new blackout curtain in my office. I bought some fabric, however I could not find Carts and Hook for KVARTAL, it looks like they stopped producing it. The carts are 6th iteration so I think…
Dank ihres schlanken Designs passt die Schutzdose problemlos in Ihre Tasche, Handtasche oder Rucksack, was sie zu einem praktischen Begleiter für unterwegs macht. Die dezente, aber dennoch ansprechende Optik der Schutzdose verleiht Ihrer…
I was redoing my cable management using the awesome Underware system by Hands On Katie, but needed something to mount my IKEA Askvader modular power plugs, so desinged this holder. It's not perfect, but id does what it's supposed to do…
I printed them with TPU and with FUZZY SKIN to give them a nice grip. → Outside walls, thickness 0.5mm and point distance 0.7mm. For the tank cover I used Snug Supports. You also need to add a Modifier→Cylinder, 32x32x12mm, Position Z 10…
For IKEA Slider from Thingverse https://www.thingiverse.com/thing:4413528 Print No Support Thickness 0.16 PLA, ABS or PETG
I was sick of the tip of the mouthpiece getting dirty when having it in my pocket so looked for a carrying case. The ones I found either didn't work for me (threads not printing well etc) or had “sharp” edges, so I made this simple tube…
Stand for Geekvape L200 Prevents mod to fall down when keeping it on table. Cutout in the front where you can see display of the mod.
Zaměstnanec ČSD pro modelovou železnici v HD kvalitě.
Printsettings: Layerhight: 0.2mm Support Needed Recommended printing in ASA/ABS or other rigid filaments
Was looking for a vape holder for my car Please let me know if you print it ! enjoy ! Category: DIY
Print Settings no infill no support material Materials: PLA, PETG, TPU, ABS, … ≤ 0,2 mm layer height 3 or more perimeters “ensure wall thickness” Version 2 should be printed in Vase Mode: 1 mm extrusion width 0.2 mm layer height 5 bottom…
GeekVape Aegis Boost Pro Stand Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0,2mm Infill: 20 Filament: Extrudr PLA NX-2 Hellfire Rot Category: 3D Printing
This is replacement for the IKEA Kvartal curtain rail system. Easy to print with supports.
Facing an issue with my yearly Beer Advent Calendar that it's sometimes hard to get to the cans if you have human sized hands. If your hands don't fit in those 65x65mm slots, this is the tool for you. Printed in festive Prusament Lipstick…
This is a very simple design, you put your cigarette inside and it prevent to fall on the side, useful for people who break the container with little fallovers Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports:…
simple overhang test from 45 to 80 degrees. Step 5 degrees
The Aegis Solo atomizer from Geekvape is really a great atomizer but the problem is that it is really not very stable when placed on a flat surface. To remedy this problem and stop breaking my Zeus tank I have precisely designed a…
As per the description, this is a quickly thrown together stand to hold the vape in the vertical when charging. I don't like vapes to be on their side- leaks are almost certain. This one does stand up on its own but is not very stable…
A Drip Tip for Geekvape Ammit 22. Print in 0.08- 0.1 Category: Other
ENG I printed the minecraft skull for the aquarium hollow, so it is better to fill it with water, for example make holes in the bottom so that it does not float. If you print 100% infill, this does not apply to you :-) . The size of the…
Kvintový a kvartový kruh - Circle of fifths and fourths Kruh s otočným středem pro jednoduché odvozování durových a molových stupnic, tónin, popřípadě akordů běžně hraných v tónině. Vysvětlivky: T=tónika, S=subdominanta, D=dominanta. A…
shade printed with 0.8 nozzle 0.32 layer hight in vase/spiral mode ring and hooks 0.4 nozzle 0.2 layer hight easy install! just click the hooks on to the frame these are printed with : Esilk-PLA white from esun
Závesný odkvapkávač pre príbor.
A nice pedestal holder for the awesome stargate multicolor coasters bu u:Kvant . Provided STL works for 2 coasters. The Freecad source design is parametric and can generate the required design for any (integer) number of coasters. See the…
A basic e-cigarette (Geekvape Aegis) cup holder designed for BMW 3, 4, and 5 series (f30/f31/f3, f36, f10) Low enough to allow the cup holder lid to be closed ! Might also work on 1 series and some other models with the same cup-holder,…
Chtěla jsem vyrobit několik papírových květin s překvapením podle návodu zde: https://www.manumi.cz/navody/papirova-kvetina-s-prekvapenim Pro zjednodušení práce jsem vytvořila tyto šablony podle původních papírových šablon. Pro listy jsou…
Monitor kvality vzduchu: Data a popis projektu: https://github.com/MarioHP/Air-quality-monitor Měření: CO2 Teplota Relativní vlhkost pevné částice prachu (PM1.0, PM2.5 PM4.0, PM10) VOC index NOx index Measurement: CO2 Temperature Relative…
This is a replacement for the (faux) leather of a Geekvape Aegis. Unfortunately, my leather has broken and started to come apart gradually. It became very uncomfortable to hold. I then removed everything down to the metal, but that also…
PETG (UFX) TRYSKA 260°C Deska 85°C Satén Násobič extruze 0,8 Rychlost 100% Výplň 20% model vytvořen podle obrázku (z TEMU)
Printed with Nobufil ABSX - 0.2 mm layer height and 75% infill for higher strength and durability.
I use my k1 with chc pro (so for unicorn you need to make it longer for 2mm) And also i don't use mcu on a head, so i am not sure that it will fit to the stock k1. prints without supports
The sugar bowl fits perfectly on the Ikea BEKVÄM shelf. In fact, it doesn’t have to be a sugar bowl — its use is completely up to you. This is my very first project! I spent a long time looking for a ready-made container that would fit…
But this is not compatible with the stock klick, you will need to put a spacer between the head and the klicky mount.
Geekvape Wenax S3 Stand - Magic Laboratory A Stand for Geekvape Wenax S3 e cigarette. Stylish, handy and exaclty your thing! It holdes your Geekvape Wenax S3 nice, but has some space for tollerances or possible sleeves you may put over…
Needed a way to hang dyson v6 accessories & heads, just wasn't finding a fluffy solution I liked, so I whipped this paired set up. Excuse my 1st fusion 360 design. Been doing autocad design 35 yrs, so this was a little too freewheeling to…
We got this IKEA BEKVÄM shelf, but the shelf was a bit to small and additionally I want to avoid holes in the wall. I designed this holder and put it on the wall with glue strips. In Slicer I used 5 walls (2mm) because I want solid hook…
You will also need 6 M3 x 4mm bolts for the hinges and 6 M3 Nuts
Not suitable for PLA - use PCTG or ASA. A slightly more narrow and tall IKEA compatible curtain clip. Same max thickness as the original but more durable* and easier to attach to both rail and curtains. Includes locking slot such that it…
There seems to be differnt curtain hooks for the Ikea KVARTAL curtain system. This one is abandoned by Ikea and I couldn't get new ones, so I made them myself. I hope it helps someone.
Simple holder for 3 pieces of CO2 hose or any other with a 6mm diameter. The design is only slid onto the cover of the aluminum cover. Mounted on the edge 4x7mm Jednoduchy drzak na 3 kusy co2 hadicky nebo jakekoliv jine s 6mm prumerem.…
This mount is designed to hold 2 double sockets and a USB module of IKEA Askvader system. it's separated in four parts for easier printing. Print on the side with the opening facing upwards. The parts have holes for the openGrid board…
Výška košíku 58 mm a různé horní průměry (54, 67, 80 mm), tloušťka stěny 1mm. Vytisknout z PLA natural.
This is a remix of a Hatch Rest wall mount. I use the IKEA Bekvam shelves to hold books in my child's room and I wanted to mount the Hatch Rest to that instead of into the drywall.
kvintkvartový kruh s možností transpozice z jakékoliv stupnice do jakékoliv jiné (3), případně jednoduché varianty bez transpozice (2)(1)
Funnel with checkvalve for collection of cooking oil/fat in a PET bottle. Built in check-valve to avoid spillage. If you care about your sewers you don't pour you cooking oil/fat down the drain, you collect it and send it for recycling…
I use many Ikea KVART lamps pointing upwards on my desk. I was tired of seeing the bright globe when walking up to my desk, so I decided to extend the lamp shades. 2 part print - I did the outside black, and the inside white. The sizes of…
A simple cover for the Wenax S3 , unfortunately the holes are not pre-cut since it has to be printed in vase mode with Overture High Speed TPU - Translucent Red . Print as slow as you can. Use 0.94mm extrusion width for the external…
Disclaimer: this one comes without any warranty, you will have to know what you're doing, I can not be held responsible for any harm to persons or material. Currents greater than 15Amp. will flow in this setup, bearing the risk of fire…
Ikea Kvart conversion from desk mount to wall, with a similar design. Unscrew the lamp from the original base and screw it to the printed one. Printed with pla 40% infill density.
I made this special-purpose connector to allow me to attach tools from my main vacuum to my hand-held Shark. It fits snug and is held by friction. Both the tool and the Shark get progressively narrower inside, but I opted not to reduce…
Plastic end cap for IKEA Kvartal curtain rod
Printed in PETG (whatever favorite color you might want to use). Infill 15% and supports (can be printed maybe also without).
I printed the long ones sideways because the one I printed vertical broke in half it probably was my print settings so ymmv The normal drip tips you can print upside down just fine
spacer for bekvam spice rack. modfied form a file i found on myminfactor adds feet ans a space for dowel rod so the spices dont fall out the back
The Holder is 3mm thick and the hole is 4mm. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30% Category: Decor
Ein sehr nützliches Gadget Ich fand die Verpackungen die man so mit sich rumschleppt zu Instabiel und den Schlüssel hat man immer bei sich. Also habe ich mir gedacht mache ich doch eine kleine Box für an den Schlüssel um immer einen…
An action cam mount and gaming mic holder for Ikea Kvart lamps There are three parts, a Kvart to action cam adapter, an action cam to microphone holder, and a pin which prints up the centre of the Kvart adapter. What it does is best…
Mřížka sání akvarijního filtru. - Jemnější než originál. Aquarium filter suction grid. - Finer than the original.
A desk lamp for the workspace. It’s far from perfect, especially in the wiring to the 4 segments, but it fully meets my needs for workspace lighting. It was printed using PET-G filament. Please note that the 3mf files contain additional…
aren't you tired of being worried about your podmod falling and getting scratched or ruined? Here is the solution! I modeled this “cover” for your vape to protect it! TLDR I'm a noob on modeling… feel free to let me know what I can do…
A simple way to mount the Lumax LED Aquarium Light by AkvaStabil to their Effect-line cover I printed three clips to mount the 73cm 23W fixture Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports:…
replacement part that I model because I have not enouth of these and I don't wanted to travel to the store. Print with 100% fill Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 or less Infill: 100% Category: Replacement…
My electronic cigarette uses the Z coils by Geekvape, and I hate it when the box is flying around my desk. So I did the logical thing and stuck the coils to my pegboard. In addition to the holder, you will need two M2.5 nuts from the…
Šablona pro značení beček s kvasem.
Herní plán pro hru složící k výuce kvantových technologií.
Ich habe nach einer praktischen Halterung für meinen Geekvape Wenax Q Pro gesucht, um das Gerät über Nacht aufrecht aufladen zu können. Leider konnte ich keine schöne und funktionale Lösung finden, daher habe ich kurzerhand selbst einen…
Cupholder for Geekvape T200 Description: A holder designed specifically for the Geekvape T200, fitting into standard car cup holders. Ideal for people who want to keep their equipment close at hand and safe while driving. Features:…
Krabička na malý dárek, prsten, řetízek apod. Nebo zážitkový Voucher. Tisk PLA krabička a víčko vrstva 0.16, šroub max 0.1 nebo méně.
Ein Clip für die E-Zigarette von GeekVape Wenax M1. Der Clip hält die M1 an ihrem Platz - Handtasche, Jacket, Arbeitstasche. Ich habe den Clip ohne Unterstützung aus PLA gedruckt.
Had this small vape dropping inside the pocket, so i made this clip-on that keeps it in reach like a pen. Added a hole for a lanyard It's a very tight fit, should be flush with the aluminium body's top, but has some "leeway" and added cut…
Replacement piece for the IKEA SKVALPA mop. I would recommend printing it in petg. No supports.
KVART lamp SKÅDIS pegboard
A small print you can use to mount your IKEA KVART Spot to the wall.
I needed to add a base to the lamp so that the cord to it could be arranged to come from the top of the lamp. It is an easy print with no need for support. There is a hole in the bottom for draing water if something comes in the top at…
TPU feet to use on the Ikea BEKVÄM step ladder. They protect the floor and provide much needed grip so the step ladder doesn't slide from under the user. Step stool version