Sansi Exterior LED Light Cover/Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated back plate that moves the wire exit from the bottom of the cover off to the side.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought some Sansi exterior LED lights from a local retailer. When I went to mount the fixture, I discovered that the location where the wires exit is at the bottom of the case, directly in line with the default vertical mounting strap for the light mounting box I was using. This meant the light would not be level when mounted.
I thought about simply drilling a new hole, but why would I do that when I can redesign it to be correct? Fortunately, Sansi made removing the back trivial.
This revised version simply moves the wire exit location off-axis so that the wires do not interfere with the mounting strap.
Be sure to use supports for the mounting tabs!
I installed the new backplate with silicone caulking to seal the back, which seemed like a good plan to me, but you do you.
Sansi Model 01-04-001-013604-2P