Sansi Exterior LED Light Cover/Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An updated back plate that moves the wire exit from the bottom of the cover off to the side.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I bought some Sansi exterior LED lights from a local retailer. When I went to mount the fixture, I discovered that the location where the wires exit is at the bottom of the case, directly in line with the default vertical mounting strap for the light mounting box I was using. This meant the light would not be level when mounted.
I thought about simply drilling a new hole, but why would I do that when I can redesign it to be correct? Fortunately, Sansi made removing the back trivial.
This revised version simply moves the wire exit location off-axis so that the wires do not interfere with the mounting strap.
Be sure to use supports for the mounting tabs!
I installed the new backplate with silicone caulking to seal the back, which seemed like a good plan to me, but you do you.
Sansi Model 01-04-001-013604-2P