Tapo C100 Camera mount for 12mm square wooden post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera mount that can be attached to a 12mm square wooden post (or larger) with 4 M2 x 10 mm countersink screws
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Tapo C100 Camera mount is designed to be fitted to a 12mm (or bigger) square wooden or aluminium vertical post. 4 holes for countersunk M2 screws are provided and the print was succesfully tested with Prusament Galaxy Black PLA on a MK4/S (see photos).
Tip: to remove the base of the Tapo you need some force to detach the snap joint from the ball. Then you can remove the flexible part from the top of the ball. Inside is a tiny screw that you need to unscrew to remove the ball from the stem. Then you can slide the stem through the clamp nut and refasten the ball to the stem and put the flexible bit back.