1 / 2
Tapo C100 Camera mount for 12mm square wooden post — image 1
1 / 2

Tapo C100 Camera mount for 12mm square wooden post

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A camera mount that can be attached to a 12mm square wooden post (or larger) with 4 M2 x 10 mm countersink screws

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This Tapo C100 Camera mount is designed to be fitted to a 12mm (or bigger) square wooden or aluminium vertical post. 4 holes for countersunk M2 screws are provided and the print was succesfully tested with Prusament Galaxy Black PLA on a MK4/S (see photos).

Tip: to remove the base of the Tapo you need some force to detach the snap joint from the ball. Then you can remove the flexible part from the top of the ball. Inside is a tiny screw that you need to unscrew to remove the ball from the stem. Then you can slide the stem through the clamp nut and refasten the ball to the stem and put the flexible bit back.

Tags