1 / 4
Wera Bins Gridfinity 1/2 nuts 10 - 18 and 19-27 and 30-32 metric
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 stackable Bins for Wera 1/2 Nuts 10 - 32
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are three bins for Wera Zyklop ½ nuts, one from 10 to 18, 19 to 27 and 30-32.
The idea is to pick them with the ratchet and release them back with it. So they fit very tight and I realised there is a tolerance when the are manifactured. If they are to tight take a electric drill with a ½ adapter and turn the nut both ways till it fits they way it should.
No supports needed. Pla or petg.
if you want a colorchange for the numbers, its at layer 187.