1 / 8
RatRig V-Core 3.1 CNC Aluminum Motor Mount Plates - CoreXY and AWD — zdjęcie 1
1 / 8

RatRig V-Core 3.1 CNC Aluminum Motor Mount Plates - CoreXY and AWD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CNC motor mounts for CoreXY and AWD with built in bearing mounts and threaded holes for the bearing stacks.

Ocena
0 / 5
Polubienia
6
Pobrania
31
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

These can usually be CNC milled for around $100-$150 from JLCCNC or PCBWay for a full set (CoreXY motors + AWD Motors, so CoreXY alone is even cheaper).

These feature holes designed to be tapped so that shoulder bolts can be used for the bearing stacks and no nuts are needed - just screw the shoulder bolt down into the tapped bolt holes on the plates.  Use some locktite if you're worried about things coming loose :)

These also feature holes designed to mount a F625ZZ bearing (5mm shaft motor) or F688ZZ bearing (8mm shaft motor) to easily start running a double shear setup for more support of the motor shaft.  You will need either longer shaft motors to use double shear or use a decoupler setup with a long shaft.  Otherwise the stock VC3.1 motor shafts are too short for double shear.  Countersunk holes also allow for the use of flat heat socket head bolts to avoid any bolts coming close to or interfering with the belts.

Since these plates are 5mm thick, the printed bolt holder that RatRig or the FMMM mod use are eliminated.  These are truly fully metal - no plastic anywhere to fail, even in high chamber temps.

STEP Files provided as this is the preferred file format for most CNC services.

The files used Left and Right to name their location.  The assumed orientation is that you are standing in front of the machine looking at the build chamber/motors.  

BOM:

  1. CNC Mill parts - 5mm 6061 Aluminum:
    1. CoreXY:
      1. 1x Bottom Left Motor Plate
      2. 1x Bottom Right Motor Plate
      3. 1x Top Left Motor Plate
      4. 1x Top Right Motor Plate
    2. AWD:
      1. All CoreXY plates plus…
      2. 1x Bottom Left AWD Plate
      3. 1x Bottom Right AWD Plate
      4. 1x Top Left AWD Plate
      5. 1x Top Right AWD Plate
  2.  Bolts:
    1. CoreXY:
      1. 6x M3x8 FHSC
      2. 2x M3x45 FHSC
      3. 16x M6x12 SHCS
      4. 16x M6 3030 T Nut
      5. 4x D5mm M4 35mm Shoulder Bolt
        1. This is a shoulder bolt where the shoulder (round) portion is 5mm in diameter but 35mm long, with an M4 thread at the end
    2. AWD:
      1. All CoreXY plus…
      2. 2x M3x8 FHSC
      3. 6x D5 M3 40mm Shoulder Bolt
      4. 8x M6x12 SHCS
      5. 8x M6 3030 T Nut
  3. Bearings and Spacers:
    1. CoreXY:
      1. 12x F695ZZ Bearings
      2. 6x 695ZZ Bearings
      3. 10x D8 M5x1mm Precision Shim
      4. 2x D8 M5x10mm Spacer
      5. 6x D8 M5x3mm Spacer
      6. Double Shear Bearings:
        1. 2x either F625ZZ (5mm motor shaft) or F688ZZ (8mm motor shaft)
    2. AWD: 
      1. All CoreXY Plus…
      2. 12x F695ZZ Bearings
      3. 6x 695ZZ Bearings
      4. 12x D8 M5x1mm Precision Shim
      5. 6x D10 M5x10mm Spacer
      6. 3x D10 M5x6mm Spacer
      7. 6x D10 M5x3mm Spacer
      8. Double Shear Bearing:
        1. 2x either F625ZZ (5mm motor shaft) or F688ZZ (8mm motor shaft)
           

Instructions: See PDF

Tagi