Milwaukee Packout - 3 Drawer - Wide Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For large hand & power tool storage
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 210
- Wydruki
- 0
- Wyświetlenia
- 1883
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
MILWAUKEE PACKOUT - 3 DRAWER - WIDE DIVIDER
Milwaukee Packout stock drawer dividers can be limiting to say the least. Especially when it comes to storing large hand & power tools. Your options are front and back depth, a grid or NOTHING (ie. Chaos)...
Here's your solution: A divider that spans the width of the drawer. Print the Ends that slide into the drawer wall slots and connect them with the printed stretcher. A Channel is cut in each part to accept a 3/16 (5mm) piece of plywood or aluminum to create the body of the divider, giving you a very sturdy wall to protect your valuable tools in transport and keep you organized.
Assembly consists of 2 ends and 2 contoured stretcher pieces all connected with dovetail joints, as pictured.
You will need in addition to your printed parts a piece of 3/16 (5mm) plywood (pictured above) or aluminum sheet that creates the body of the divider.
Cut dimensions are: 15.1875" x 2.6875" or 385 x 68 mm
All pieces should be oriented upside down in the slicer and supports will need to be enabled for stretcher prints.
HAPPY PRINTING