Ultimate Exhaust system for K1 Max for NorcoT lid riser by TonyF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made this to have a better exhaust system to print indoor. Done a smoke test and its sucking all the fume out and
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I'm using 100mm PLA-printed reducers with a 150mm bathroom exhaust fan, which I purchased from my local store. It's also available on AliExpress."
Let me know if you'd like any further refinements!
https://www.aliexpress.com/item/1005005990991070.html?spm=a2g0o.productlist.main.3.1e54xy7Nxy7Ni0&algo_pvid=571b5325-4207-4e43-8a0e-39900e1d142b&algo_exp_id=571b5325-4207-4e43-8a0e-39900e1d142b-1&pdp_ext_f=%7B%22order%22%3A%22736%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21NZD%21176.05%2156.34%21%21%21709.31%21226.98%21%40%2112000035207127487%21sea%21NZ%21190563619%21X&curPageLogUid=SRD7goSenHWg&utparam-url=scene%3Asearch%7Cquery_from%3A
You can buy 100mm fan too.
I've included both STL files for the duct connector, one facing up and one facing down.
IMPORTANT….!!!!
I recommend printing this with PETG or ABS, but I printed mine with Hyper PLA at 80% infill to ensure strength. So far, it’s holding up well
I have attached a snapshot of how I printed the object to save time and ensure a smooth print. I would recommend this method, but it's entirely up to you.
Happy Printing lads….!!!