1 / 8
Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro | V-Slot Covers — zdjęcie 1
1 / 8

Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro | V-Slot Covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make your printer look better and newer with these top & side panels

Ocena
3,75 / 5
Polubienia
243
Pobrania
1312
Wydruki
5
Wyświetlenia
6017
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Tired of the typical profile fillers that look almost the same as original?

Introducing the ULTIMATE PROFILE COVERS!!! Turn your old (or not that old) printer into a modern looking printer with these simple accesories.

Slide them in like butter and enjoy your newer looking printer from now on.

EDIT: For the side panels you'll need 8xM4 t-slot nuts and 8x M4x8 nuts.

 

Normal supports needed (Tree supports are not recommended)

Not supports needed for the side panels (obviously)

PS: You should have your support settings dialed in so they are very easy to remove in one pull.

Printed mine at 0.32mm layer height, 20% infill. PLA+

 

Share your makes, try different colors, like this model and be happy.

PS: I can add more variants for your printers if you send me the measures.

Tagi