1 / 3
Brennenstuhl 360-2 Powerstrip Feet — zdjęcie 1
1 / 3

Brennenstuhl 360-2 Powerstrip Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stable feet for Brennenstuhl powerstrip (prevents tipping over)

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This specific powerstrip is particularly prone to tipping over, because it has a round underside with two small “feet” for screw mounting. These printable feet are mounted to the powerstrip using the wall mount screw holes. They prevent it from tipping over and provide a stable base when some devices and power supplies are plugged in.

I recommend printing in PETG for temperature stability and use the orientation of the provided 3mf file (laying on the side). This way supports are needed for all pockets, but you get a perfect round geometry and no visible stair stepping on the top of the feet. You can also print the model in its final orientation without supports.

You need two prints of this model per power strip. The model has 3 screw holes, so that the same model can be used on both ends of the power strip.

Other hardware needed:

  • 3x M4x25mm screw (cylindrical head)
  • 3x M4 nut (lock nut preferred but not required)
  • 12x round rubber anti slip pads ca. 8 mm diameter and 2 mm thickness (optional)

Tagi