Brennenstuhl 360-2 Powerstrip Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stable feet for Brennenstuhl powerstrip (prevents tipping over)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This specific powerstrip is particularly prone to tipping over, because it has a round underside with two small “feet” for screw mounting. These printable feet are mounted to the powerstrip using the wall mount screw holes. They prevent it from tipping over and provide a stable base when some devices and power supplies are plugged in.
I recommend printing in PETG for temperature stability and use the orientation of the provided 3mf file (laying on the side). This way supports are needed for all pockets, but you get a perfect round geometry and no visible stair stepping on the top of the feet. You can also print the model in its final orientation without supports.
You need two prints of this model per power strip. The model has 3 screw holes, so that the same model can be used on both ends of the power strip.
Other hardware needed:
- 3x M4x25mm screw (cylindrical head)
- 3x M4 nut (lock nut preferred but not required)
- 12x round rubber anti slip pads ca. 8 mm diameter and 2 mm thickness (optional)