Counting matching models…
Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Nutze mein Modell, wenn du einen Brennenstuhl® LED-Strahler (Modell Rufus) auf ein Stativ montieren möchtest. Ich habe es für den 3000 Lumen-Strahler konstruiert. Ich vermute aber, dass es auch für die anderen Rufus-Modelle passt.…
A mounting bracket i have designed for this Brennenstuhl Powerstrip. I used 4x15mm countersunk wood screw to mount it to the underside of my desk. Print settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament…
Mount for Brennenstuhl powerstrips
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
Drawn and printed an mount for my Brennstuhl Premium-Line a long time ago. The mounts I found online were not tight enough or the nose not stable. Mounted under my desk - fitting perfectly and very tight. Printed in PETG for flexibility…
In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit.In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit. After…
This is a simple mount for Brennenstuhl Premium-Alu-Line Extension Sockets. It's designed for 4 mm screws and tight-fit. Use two of them per extension socket. Position them using the aluminium profile, slide it in and finally reassemble…
https://www.brennenstuhl.com/de-DE/produkte/steckdosenleisten/steckdosenleiste-einzeln-schaltbar-6-fach-2m-h05vv-f-3g1-5
Stabilere Halterung für Brennenstuhl Premium-Line Steckdosenleisten
Custom made, tight-fit, wrap-mount for your Brennenstuhl Eco Line Extension socket. Mount it under a desk or cabinet, or on a wall. Slides along the extension socket rail and snaps in place with little bumps wrapping the sockets. Use any…
I ordered a Brennenstuhl 8 port powerswitch off Amazon. It's supposed to go under my desk, but had no way of mounting it, since the package came with only one adapter plate (white in the photo). Printed in PETG with 3 walls and 30%…
Optional mit kleinem Haken für längere Kabel oder ähnliches
Halterung für Brennenstuhl Secure-Tec Steckdosenleiste Category: Household
Currently - July 24 - the “Brennenstuhl Eco-Line 10-Way Power Strip” is the cheapest 10-socket power strip on amazon. Unfortunately, it has no integrated mounting options. Thats why I created this - a compact set of of mounting brackets.…
I remixed this for my simrig. Its slightly bigger than the original version for better tolerances. I added a 9mm hole at the end for M8 screws. Like the original version you have to unscrew the end cap and slide the holders in and screw…
After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality
3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…
Recently bought a Brennenstuhl Power Plug Extender for my office and encountered the fact, there's only 1 fixing bracket for wall mounting. Sh... So I designed one in Fusion360 here's a link to the extender:…
printed with Ankermake M5 in normal Mode, 30% infill
Simple model to mount the Extension cords/Sockets by brennenstuhl solidly wherever you want. Uses two screws per side. Needs supports to print, I suggest printing in the orientation of the .3mf for best strength.
Its a simple remix for the bigger brennenstuhl socket mount
The original file was perfect but the sides of my desk were obstructed by the metal frame so i couldn't slide my extension socket in. Added screw holes (M4 countersink like the original ) to the sides of the model and problem solved!…
I made a power strip holder for a Brennenstuhl adapter. The shape of this brand is different to the usual and an ordinary mount didn't fit. So I made my own! Best when printed when outside faces are on buildplate. Requires four screws to…
Customized holder for Spax-Screws on inner side
Brennenstuhl power strip customizable brackets This design is for the Brennenstuhl 6-way Euro power strip with individually switchable sockets.…
A model to mount a Brennenstuhl premium-line power Strip to an IKEA Skadis Board. I'll use the closed mount at the sides and the open one the middle. To insert the power strip you need to remove the end cap an put it back on afterwards.…
Modified versions for mounting the Brennenstuhl ST BM 0619 Secure-Tec power strip under a tabletop.flush with the outside of the tabletop. Only works for Secure-Tec power strips, not for Eco Line. Category: Organization
Alternative mounting for brennenstuhl strip when original hole not fit.
Easy print, opening to the top. I would go with more stable infill, something like 35 / 40 -ish percentage. Use two screws to mount it to the wall. Note: You cannot mirror it and properly use it i think. Because there are some certain…
I created a bracket for my Brennenstuhl Hugo power strip to mount the strip below my table. Same bracket for both sides of the strip. As the strip has a rectangular form it might be possible to use this bracket also for other strips.…
Simple switch cover for Brennenstuhl Bremounta power strip to block access to the switch.
Mounting bracket for power sockets with height 55mm and width 72mm like the Brennenstuhl Premium-Line. I suggest printing with 3 layer walls.
Replacement end cap for desktop extension socket that holds additional keystones for eg. ethernet. Has a recess for 8mm silicone anti-slip feet on the bottom. Premium-Office-Line extension socket such as:…
A snug fit snap mount for Brennenstuhl Premium-Protect-Line and Premium-Alu-Line double row extension leads. Uses just 3 screws per mount. How it snaps Instructions Print 2 or 3 mounts to your preference (I used 3 mounts) Level and screw…
Original cord comes only with 1 clamp. not suitable if you want to put under a desk. Print in PETG
Brennenstuhl Primera-Line wall mount for 4 or 8 sockets verison
Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands. The bracket can be screwed onto any flat surface and mounts the power strip at…
This is an IKEA Skadis mount for the Brennenstuhl Premium extension leads. Should work with any of these Premium-Line models: Premium-ALU-Line Premium-Protect-Line Premium-Alu-Line Suggested print settings: print with PLA/PLA+ no support…
Description This is a holder keeping your Brennenstuhl PL 200 flashlight nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The model was designed for the PL 200 AC model, but should fit the other model variants as well. What…
jsut print it but @ least with 20%+ infill for extra strenght
Invisible hooks for Brennenstuhl Power Strip Cut 5mm threads into the holes and use 35mm long (if i recall correctly) screws.
Simple adapter to mount a Brennenstuhl Alea Socket Block/Cube on the IKEA Skadis board. It connects the mount shipped with the Brennenstuhl Alea via two M3x8 screws.
Winkel zum aufstellen oder Befestigen an einer Dachschräge mit 45°. Benötigt wird: 4 x M5x50 Schraube 4 x M5 Mutter Montage der Muttern: Schraube durch das Loch stecken und eine Mutter aufschrauben. Mutter mit einem Heißluftfön oder…
Holder with clamp for power strip Brennenstuhl Ecolor 115324400 Power strip holder. Clamps to the desk, quick assembly and disassembly without disturbing the tabletop. Should fit a desk with a top thickness of up to 20mm Printed without…
Fix your Brennenstuhl powerstrip to your desk! Fits desktops from 25 to 32mm. Printed in ASA, PETG should also work fine. 0.4mm nozzle, 0.2mm layer height. No supports needed, you should use 5 perimeters. You should turn…
Power Outlet Strip Holder for Pegboard with 15mm Grid for a Brennenstuhl Eco-Line power strip
A stand for the Brennenstuhl PL200 LED light: https://www.brennenstuhl.com/de-DE/produkte/led-taschenlampen-handlampen-nachtlichter/led-akku-handleuchte-pl-200-ac-200lm Pictured in neon green TPU ("flexible material" STL) and silver PLA…
Two brackets to fix a Brennenstuhl Eco-Line Powerstrip (in my case with 6 sockets) on your openGrid using openConnect mounts. Useful if you are using underware 2.0 to manage your cables. I found that 10 year old sockets I had were about…
Steckdosenhalter für Brennenstuhl 3 Fach Steckdose. Es passt auf das Kopfteil vom Bettgestell Linda (180cmx200cm) --- Socket holder for Brennenstuhl 3 compartment socket. It fits on the headboard from the bed frame Linda (180cmx200cm).…
Für die Steckdosenleiste musste eine Halterung her, die sich auch ohne Stützmaterial drucken lässt. Die Druckteile sind leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe: 0,2 mm Perimeter: 5 Stützen: keine Zur…
I had to attach the socket to a concrete wall. The so-called wall mount of the Brennenstuhl socket is just a small hole, allowing zero tolerance. So I screwed in the top screw and created this bracket for the other end. Use M4 screws.
This is a quickly designed mount for a Brennenstuhl Powerstrip. Specific for the UE46ES6200.
Halter für eine 3-fach Steckdosenleiste Brennenstuhl Eco-Line ohne Schalter. Die Halterung kann mit Senkkopfschrauben 3,5mm entweder auf einer waagrechten oder einer senkrechten Fläche befestigt werden. Ich habe je eine Version mit…
A second part to hang the brennenstuhl premium line extension cord like the one included. I recommend printing in petg.
2 small adapters that utilize the original mounting points to mount the power-plug-rail onto the Bineer Toolwall. Finally there is always a power socket when you need one :) The adapters are snap-fit so you can take the rail down when…
Wallmount for the outdoor Brennenstuhl extension cord
Wandhalterung für den Fußboden Kabelschalter https://www.amazon.de/gp/product/B00W9OS89U/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1 Rafts: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 15% Walls: 3
I wanted to mount the Brennenstuhl to the side of the Kallax, in order to safe some space on the floor. Since I already used the https://www.printables.com/model/588950-skadis-to-kallax-adapter on the other side of the same Kallax, it…
Replacement for the really unusable Plug Holder of the Brennenstuhl Garant G CEE IP44 Camping-/Maritimkabeltrommel 20m AT-N07V3V3-F 3G2,5 Use 5x30 and 4x30 flat head screws to mount clamp.
Ich habe mir für die Fernbedienung meiner Funksteckdosen der Firma Brennenstuhl einen Halter für meinen Absaugschlauch gedruckt. Somit kann ich beim benutzen des Schlauches die Steckdose an der Mein Werkstattsauger ist direkt anschalten.…
I needed an adjustable holder for the PL200 so that I could use it as a workshop lamp. In addition to the printed parts, you also need 1 M4 nut and an M4x16 lens head screw ISO 7380-1. The magnet has a diameter of 25mm and is fixed with…
put your remote on the wall!
Kleine Halterung für die Ikea Skadis Lochwand um die Brennenstuhl PL200 LED-Lampe zu befestigen. Gedruckt habe ich es auf einem Creality K1C aus PLA+ mit "tree support" . Small bracket for the Ikea Skadis pegboard to attach the…
These mounting brackets replace the stock endcaps of the premium line series of extension cords from Brennenstuhl. Printed with 0.8mm nozzle, 4 wall loops, 25% infill.
Mein Sohn hat es in der Vergangenheit öfters hinbekommen den Hauptschalter von meinem PC zu betätigen. Dem musste ich abhelfen und habe mir eine kleine Abdeckung dazu gedruckt. So kommt der Nachwuchs nicht mehr ran an den Schalter und die…
The original remote is low quality and makes awful rattling sound so I designed a new one. It doesn't make any noise and it's satisfying to click. The battery is visible so it can be thinner, it won't pop out. Printed with petg at 0,2…
Features Mounts to left or right table leg Clip-in system for Brennenstuhl power strips (PSU) Two variants: 54 mm hole spacing Customizable hole spacing with OpenSCAD Printing & Assembly Instructions Print the mount in the default…
This is an IKEA Skadis mount for double row Brennenstuhl Premium extension leads. Should work with any of these Premium-Line models: Premium-Duo-ALU-Line Premium-Protect-Line (double row) Premium-Alu-Line (double row) Suggested print…
I wanted to twist the ALEA Power Cube to get better access to the side ports. I used two existing designs to create it. It fits into the bottom port and is connected to my desk using double-sided adhesive tape. Kudos to @gabhalling for…
This specific powerstrip is particularly prone to tipping over, because it has a round underside with two small “feet” for screw mounting. These printable feet are mounted to the powerstrip using the wall mount screw holes. They prevent…
This replacement diffuser/screen/shade for the brennenstuhl can be used as a simple replacement or to color/tint the light output (I have personally used glow-in-the-dark filament to create a greenish light for halloween). I highly…
Remote Holder (Brennenstuhl) RCT CE1 CR
These outlet strips clip directly into the Brennenstuhl power strips and turn them sideways so if you mount them to the bottom of your desk, heavy plugs don't fall out. For the regular one, you will need some metal clips (as pictured)
Brennenstuhl Eco-Line wall or table mount, can be screwed or fixed with double-sided adhesive tape
The rotating original version by WilcoK solved my problem for the broken original mounting bracket. However, it's a bit unstable for my liking and I didn't need the rotation. So this is a version fora fixed position. Locked by one screw…
This model allows mounting a Brennenstuhl Alu-Office-Line Power Strip 6-fold (1391040600) on the side of an IKEA Bror shelving unit with 40cm depth (e.g. 094.717.41 ). Required for assembly are two M5x9.5 heat set inserts (M5x5.8 probably…
There is a version with a flat mounting plate for screwing or gluing. This is intended for lighting the interior, trunk, or helmet compartment of vehicles (no photos). And there is a special version for 50 mm diameter tubes for gluing.…
It took me a while to find a wall mount for my Brennenstuhl 6-outlet power strip. It was important to me to find a mount that would allow me to easily remove the power strip whenever I wanted. During my search, I came across numerous…
Added some screw tabs to mount the power strips with added holders. No need to have room to slide it over the holder after mounting. Print on the side without supports. 20% infill should be good, 2 perimeters is suffuicient.
Adapterplatte zur Befestigung eines Brennenstuhl Strahlers der Serien 2050-3050 an der Decke bzw. Balken. Benötigt werden 2 Senkkopfschrauben M4*20 und Muttern, sowie die geeigneten Befestigungsschrauben. Category: Tool Holders & Boxes
I wanted to mount my single switchable Brennenstuhl to the side of the riser of my desk stand. Since it was about the same depth as the power strip, it was a nice fit. I changed the mounting system so that it would clamp directly to the…
* Closed design: To install, one of the two original end caps must be unscrewed. (2 screws) * Snap-on mount. Not tested by me
Motivation I wanted to design a flexible holder for Brennenstuhl power strips of various types (n-way). It should work with any housing from the Brennenstuhl Premium-Line (single row). Easy mounting and unmounting should be possible,…
Summary Simple adapter that allows you to securely mount Brennenstuhl Premium-Line 6 socket strip to 85x55x190cm deep IKEA BROR shelving unit . I cannot guarantee compatibility with different socket strip or IKEA BROR furniture. I think…
Motivation I wanted to design a flexible holder for Brennenstuhl power strips of various types (n-way). It should work with any housing from the Brennenstuhl Premium-Line (single row). Easy mounting and unmounting should be possible,…
for all possible fixtures on GoPro mounts.
Anau einer Brennenstuhl Taschenlampe an einem wera tool-check
So, the bracket on my Brennenstuhl light is broken... What to do? Well, I do have a 3D-printer... So, made for 2x 18x5,1mm magnets. I bought mine from either Aliexpress or Amazon. No links, sorry. I have a whole box of mixed magnets for…
This lets u mount the https://www.printables.com/model/32070-brennenstuhl-eco-line-extension-socket-mount by @Dominik_72 to ur bed. Really nice model by domikm thank u. U'll need 8 M3 Inserts and 8 M3 Screws 10mm or 12mm long.
This replacement diffuser/screen/shade for the brennenstuhl can be used as a simple replacement or to color/tint the light output (I have personally used glow-in-the-dark filament to create a greenish light for halloween). I highly…
Invisible hooks for Brennenstuhl Power Strip Cut 5mm threads into the holes and use 35mm long (if i recall correctly) screws.
Für die Steckdosenleiste musste eine Halterung her, die sich auch ohne Stützmaterial drucken lässt. Die Druckteile sind leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe: 0,2 mm Perimeter: 5 Stützen: keine Zur…
Anau einer Brennenstuhl Taschenlampe an einem wera tool-check
Added some screw tabs to mount the power strips with added holders. No need to have room to slide it over the holder after mounting. Print on the side without supports. 20% infill should be good, 2 perimeters is suffuicient.
So, the bracket on my Brennenstuhl light is broken... What to do? Well, I do have a 3D-printer... So, made for 2x 18x5,1mm magnets. I bought mine from either Aliexpress or Amazon. No links, sorry. I have a whole box of mixed magnets for…
The original file was perfect but the sides of my desk were obstructed by the metal frame so i couldn't slide my extension socket in. Added screw holes (M4 countersink like the original ) to the sides of the model and problem solved!…
