Creality CR-10 Smart Fan Adapter For MicroSwiss CR6-SE All Metal Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the fan adapter required to fit the MicroSwiss all metal hotend for the CR6-SE onto the Creality CR-10 Smart
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 1544
- Wydruki
- 7
- Wyświetlenia
- 5585
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
IF YOU DOWNLOAD THIS MODEL, PLEASE TAKE 1 SECOND TO RATE OR LIKE IT… THAT IS ALL I ASK IN RETURN, THANK YOU.
In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are not too many options listed online specifically for this application... however... the Creality CR6-SE printer is very similar in many ways and the MicroSwiss all metal hotend for the CR6-SE can be very easily made to fit the CR-10 Smart.
► https://store.micro-swiss.com/products/all-metal-hotend-kit-for-creality-cr-6-se
Other than the MicroSwiss all metal kit, the only other parts you will need are:
► (QTY:2) M3x10mm socket head cap screw
► (QTY:2) M3x15mm socket head cap screw
► 3D printed fan adapter that can be found here
Note that this is the fan adapter that I designed. The one listed on the MicroSwiss website does not seem to fit properly. It is too deep and the extruder fan will interfere with the hot end fan shroud cover when you try to install it.
The entire installation is otherwise very typical of a MicroSwiss all metal hotend installation that you would do on any other 3D printer. In an upcoming video, I will be converting this machine to a direct drive extruder in combination with this hotend. So please subscribe and keep an eye out for that video in the near future!