1 / 1
Revo Nozzle Holder 1515 Profile Voron0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little Revo Nozzle Holder for a Voron0 or anything that uses a 1515 profile
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 82
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quite a simple nozzle holder for Revo nozzles.
I used some drop in nuts and M3 screws to fit it in place.
Depending on how good you printer is dialed in you should be able to push the nozzles in place. Maybe you need to “screw” it in. But the nozzles should not vibrate when put in the holder ;)
I also wanted to try it with TPU but never did. So if someone does that, please tell me if something should be changed :)