1 / 1
100mm to 125mm (1/3rd diameter) with 90 degree bend - Air duct exhaust
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
100 to 125mm (in reality 123mm so it fits in an 125mm air duct), with a 90 degree bend. The 125mm end is 1/3rd diameter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This accessory is designed for exhausting 3D printer fumes to an 125mm air duct, but still being able to use the 125mm air duct for other purposes (like cooking).
One side is (1/3rd diameter) 123mm, so it fits in an 125mm air duct.
The other side is 100mm, so a standard 102mm air hose fits over it.
Supports required.