Meshtastic Solar Enclosure Rak 19007 Heltec
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solar enclosure for the most common Meshtastic devices
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I initially designed this for the rak wisblock 19007. I have also made a version for the heltec v3. It uses a 100x100 5v solar panel, n-Female bulkhead fitting, and 18650 batteries. I would not call this a weatherproof enclosure, but I would say it's weather resistant. There is a weep/vent hole on the heltec version that I don't think I merged back into the rak version.
The heltec version of the case has some clips to retain a solar charge controller as the heltec does not have integrated solar charging capability.
The slot on the rak version is for the bluetooth antenna to slide into.
Required Hardware:
- 18650 battery contacts size 16x16.5mm AliExpress
- 4x m3x10 machine screws for the lid (stainless steel recommended)
- 2x m3x5mm machine screws for retaining mcu (heltec version only)
- 4x m1.6 for mounting (rak version only)
- 1x N-female bulkhead for the antenna AliExpress
- HW-736 solar charging module (heltec version only) AliExpress
- 100mmx100mm 5V solar panel AliExpress
- 2x 18650 batteries
- protection circuitry for the batteries recommended
- glue
Onshape link: https://cad.onshape.com/documents/04590957c0c19dde02f99b5f/w/a5a318dba1fdd264794e9296/e/d93b63c3a19146ba243a241a
Look at the versions and history tab to view where I branched off to the heltec variant if needed.