Meshtastic Solar Enclosure Rak 19007 Heltec
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solar enclosure for the most common Meshtastic devices
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 68
- Makes
- 0
- Views
- 987
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I initially designed this for the rak wisblock 19007. I have also made a version for the heltec v3. It uses a 100x100 5v solar panel, n-Female bulkhead fitting, and 18650 batteries. I would not call this a weatherproof enclosure, but I would say it's weather resistant. There is a weep/vent hole on the heltec version that I don't think I merged back into the rak version.
The heltec version of the case has some clips to retain a solar charge controller as the heltec does not have integrated solar charging capability.
The slot on the rak version is for the bluetooth antenna to slide into.
Required Hardware:
- 18650 battery contacts size 16x16.5mm AliExpress
- 4x m3x10 machine screws for the lid (stainless steel recommended)
- 2x m3x5mm machine screws for retaining mcu (heltec version only)
- 4x m1.6 for mounting (rak version only)
- 1x N-female bulkhead for the antenna AliExpress
- HW-736 solar charging module (heltec version only) AliExpress
- 100mmx100mm 5V solar panel AliExpress
- 2x 18650 batteries
- protection circuitry for the batteries recommended
- glue
Onshape link: https://cad.onshape.com/documents/04590957c0c19dde02f99b5f/w/a5a318dba1fdd264794e9296/e/d93b63c3a19146ba243a241a
Look at the versions and history tab to view where I branched off to the heltec variant if needed.