1 / 1
IKEA Skadis x BOSCH Zamo III
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tray holds a BOSCH Zamo III and can be mounted on IKEA Skadis.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This tray holds a BOSCH Zamo III and can be mounted on IKEA Skadis.
I didn't really search for an existing solution, instead I built my own.
I tried printing it turned 13° without support on my P1S, but it ended up in misaligned layers.
This was one of the first prints with my P1S, so maybe with some tuning in the slicer it is possible though.
Finally, I went with a tree support for the hooks.