IKEA NYMÅNE Work Lamp GU10 Bulb Adapter

https://www.ikea.com/us/en/p/nymane-work-lamp-w-charging-led-bulb-anthracite-20477751

I found one of these in “as-is” at my local IKEA thinking I'd be able to use a TRÅDFRI GU10 bulb, only to find an E17 once I got home. After doing some research, I couldn't find a reputable source for a Zigbee-enabled bulb with for this particular socket.

So instead of doing the sensible thing and accepting a lamp that I couldn't automate, I bought a couple adapters and modeled this up to replace the socket insert. This replaces the plastic insert that holds the E17 bulb in the lamp head using a GU10 socket mounted to it. The socket should be screwed to this piece with the wires routing through the center. Once assembled it should clip into the existing mount inside the lamp head.

These are the adapters I butchered for their socket: https://a.co/d/0lgcSXP. I was hoping to use them as they are, but it ended up being too long and the bulb stuck out of the head. You could probably get away with just buying base sockets since I imagine they are standard(ish), however your milage may vary and I've only tested with the linked above.

In my build (which I forgot to take pictures of), I needed to add a bit more wire to keep the built-in switch along with some WAGO connectors. The whole assembly is a bear to reassemble, so take your time and try not to break any of the many plastic clips. If anyone comes across this and would like photos, I could be convinced to take my working lamp apart (no money, just ask nicely).