1 / 3
Motherboard Fan Mount for Creality K1C
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
80mm fan mount for the Creality K1C motherboard
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1004
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (53)Powiązane
Please read the cautions.
This model was tested and printed on a K1C (without support).
I used an Arctic P8 Silent fan (80 mm x 25 mm) + LX8015 DC-DC Adjustable Step-down Converter because the fan is 12v. The fan is way more quieter then the standard one and offers more airflow for cooling.
The safest way is to use a 24v 3-pin fan because you don't have to use the step-down converter!!!
You will need:
- 4 x M3 Heat Set Inserts (max 5 mm length), I used M3*4*4.2 for the fan;
- 2 x M2 Heat Set Inserts (max 3 mm length), I used M2*3*3.2 for the step-down converter.
The fan was connected to -out and +out of the converter and the sensor wire directly to the motherboard.
CAUTION!!!
- IF YOU WIRE THE FAN THE WRONG WAY YOU CAN DAMAGE THE MOTHERBOARD AND/OR THE FAN!!!
- USE A 12V FAN ONLY IF YOU KNOW WHAT YOU'RE DOING!!!
- USING THIS MODEL RESULTS IN THE INABILITY TO USE THE METAL BOTTOM LID!!!