1 / 1
BetaFPV Meteor75 Pro HD O4 Whoop Box - Carrying Case — zdjęcie 1

BetaFPV Meteor75 Pro HD O4 Whoop Box - Carrying Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box to hold the Meteor75 Pro HD O4 and some accessories

Ocena
0 / 5
Polubienia
9
Pobrania
27
Wydruki
0
Wyświetlenia
722
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This file contains only the case portion of the model.  The lid from the original model should still function.

I'm not a wizard with Fusion360, so the magnet holes were also elongated by this change.  To circumvent this problem, I added 6x 25mm pegs, which must be inserted into the magnet holes in order to bring the magnets back to their intended height.  BOM for magnets and other accessories in the original description.

Prints without supports in PLA, 2 perimeters, 5% infill.

Tagi