EVA 3.0 E34M1 V6 TZ2.0 Hotend Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New designed V6 TZ2.0 Hotend Mount for the E34M1 / EVA 3.0 system. Blocks the airflow from the hotend fan to the nozzle.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 1096
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a newly designed hotend mount for the EVA 3.0 / E34M1 system. The version available here on printables allows the airflow from the hotend fan going to the nozzle. That can cause fine hairs on prints (stringing). I want to block that flow and designed a new mount.
It comes in 2 versions: one for short screws to mount it on the toolhead and one version for long screws.
You need a good bridge setting in the slicer. The model is designed for printing without supports.
I printed it with ABS:
5 walls
5 top/bottom layers
55% infill
Use 0.2mm layer height to benefit from the built in supports!