EVA 3.0 E34M1 V6 TZ2.0 Hotend Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New designed V6 TZ2.0 Hotend Mount for the E34M1 / EVA 3.0 system. Blocks the airflow from the hotend fan to the nozzle.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 208
- Makes
- 1
- Views
- 1,096
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a newly designed hotend mount for the EVA 3.0 / E34M1 system. The version available here on printables allows the airflow from the hotend fan going to the nozzle. That can cause fine hairs on prints (stringing). I want to block that flow and designed a new mount.
It comes in 2 versions: one for short screws to mount it on the toolhead and one version for long screws.
You need a good bridge setting in the slicer. The model is designed for printing without supports.
I printed it with ABS:
5 walls
5 top/bottom layers
55% infill
Use 0.2mm layer height to benefit from the built in supports!