1 / 2
(Remix) Yaseu FT-891 Radio and Yaseu FC-50 Tuner Armor / Rails for small printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I have a smaller printer (Ender 3 V2) i split this into smaller parts so they will fit on the print bed.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
The radio rail will need supports due to the bend in the handle, but the other parts should print fine without as long as you print the files with the recess oriented upwards.
To print on the opposite side, mirror the arts in your slicer software.
Please note the max screw length if you are not using the screws that comes with the FC-50 kit.
