1 / 1
40.5mm Lens Hood 0.5mm pitch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens hood I made in FreedCAD for use on my Kiev mount Helios-103 53mm. Should work with many other lenses.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Lens hood I made in FreedCAD for use on my Kiev mount Helios-103 53mm. Should work with many other lenses.
The FreeCad and step file is included, since you may need to tweek the threads for your machine. I found printing the threaded part at 40.25 resulted in a good tight fit for me, though this may be due to my filament being wet.