Cable Conduit for Project Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this cable conduit to tidy up the cable conduits in my car
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
So I made this cable conduit management system for my car, uses 2xM7 bolts to secure each piece of conduit against movement, I will be drilling and inserting Rivet Nuts into the car to bolt them to
There are also units to use that can be used to fish out sections of your loom and direct it to places along the chassis.
It is designed that you can already run your cables in place and then secure this over the cable against the chassis rail to secure.
You can also remove and replace sections if you need to access a specific section for diagnostics or additions/patching.
Anything that can fit into 30mm conduit can fit through here.