1 / 4
Skadis M3 T-nut mount for Home Assistant Voice PE - No Supports — zdjęcie 1
1 / 4

Skadis M3 T-nut mount for Home Assistant Voice PE - No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another Remix of the HA Voice PE Skadis mount. Mainly focused on better printability.

Ocena
0 / 5
Polubienia
5
Pobrania
22
Wydruki
0
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

A remix of https://www.printables.com/model/1163513-skadis-m3-t-nut-mount-for-home-assistant-voice-pe, which is a remix of https://www.printables.com/model/1113866-skadis-connector-plate-for-home-assistant-voice-pe.

The initial one uses normal hooks. 

The remix utilizes the great T-Nut mounting system but kept it's side printing orientation. 

I changed the orientation to print on the flat bottom surface. Therefore changing half of the audio reflection arc to a chamfer.

I personally like to use this M3 T-Nut system: https://www.printables.com/model/469364-skadis-m3-t-nuts-mounting-no-m3-nuts-or-tapping-ne 

I use cap head screws (M3x5 or M3x8) and therefore changed the countersink to counterbore.

Print settings don't matter too much as the model is not exposed to any significant forces, but this is what I used for the print seen in the images:

FilamentFiberlogy PETG Matte Blue
Nozzle0.6mm
Layer Height0.25 (0.2 initial layer)
Line Width0.65
Wall Loops / Perimeter3
Print orientationAs uploaded / As shown in second image

 

For you OnShape users. This is the link to the document: https://cad.onshape.com/documents/9008b0eb9dde597e90123b81/w/7c0fc199f14a0133a89a4459/e/7d1a87167dfad7806bc95c2e?renderMode=0&uiState=67d6ef48244d68270e991e72

Tagi