1 / 4
Skadis M3 T-nut mount for Home Assistant Voice PE - No Supports — image 1
1 / 4

Skadis M3 T-nut mount for Home Assistant Voice PE - No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Another Remix of the HA Voice PE Skadis mount. Mainly focused on better printability.

Rating
0 / 5
Likes
5
Downloads
22
Makes
0
Views
150
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

A remix of https://www.printables.com/model/1163513-skadis-m3-t-nut-mount-for-home-assistant-voice-pe, which is a remix of https://www.printables.com/model/1113866-skadis-connector-plate-for-home-assistant-voice-pe.

The initial one uses normal hooks. 

The remix utilizes the great T-Nut mounting system but kept it's side printing orientation. 

I changed the orientation to print on the flat bottom surface. Therefore changing half of the audio reflection arc to a chamfer.

I personally like to use this M3 T-Nut system: https://www.printables.com/model/469364-skadis-m3-t-nuts-mounting-no-m3-nuts-or-tapping-ne 

I use cap head screws (M3x5 or M3x8) and therefore changed the countersink to counterbore.

Print settings don't matter too much as the model is not exposed to any significant forces, but this is what I used for the print seen in the images:

FilamentFiberlogy PETG Matte Blue
Nozzle0.6mm
Layer Height0.25 (0.2 initial layer)
Line Width0.65
Wall Loops / Perimeter3
Print orientationAs uploaded / As shown in second image

 

For you OnShape users. This is the link to the document: https://cad.onshape.com/documents/9008b0eb9dde597e90123b81/w/7c0fc199f14a0133a89a4459/e/7d1a87167dfad7806bc95c2e?renderMode=0&uiState=67d6ef48244d68270e991e72

Tags