Zotac 3070ti Trinity custom shroud FTW3 Tribute Sectux Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M5 screws remix, no M3 nuts needed, re designed for the Arctic P9 MAX fans.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This remix aims to make use of the Arctic P9/P9 MAX instead of the F9 fans.
With this version you will surely lose access to the second pci-e slot but it doesn't require cutting the fans anymore.
Total card thickness: 76mm
The top shell is attached to the fans using the regular self threading M5 screws that come with them.
The fans are attached to the bottom plate with M5x9mm screws, although, depending on your tolerance it coud work even with M4x9mm.
The plate is attached to the heatsink using the original screws that held the OG shroud.
I used a pretty ugly PETG and a poorly calibrated ender 3, the results depends heavily on the material and printer, look at Darjanator's version , it came out pretty well.
I recommend using PETG or some kind of heat resistant material, PLA might melt before you even realize.