soldering tin roll holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It can be really annoying to try to solder some ICs onto a PCB when the tin-solder wire keeps getting stuck somewhere.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
It can be really annoying to try to solder some ICs onto a PCB when the tin-solder wire keeps getting stuck somewhere. But those times are over! Just print out a tin spool holder - now you can keep the spool rolling and the wire coming, all nice and smoothly. Without much effort and without it getting stuck & distracting you from your soldering task.
The spool holder is easy to use. You just slide the tin spools onto the cylinder part and then snap it into the holder part. In case you need an even more stable setup, there are holes you can use to hold everything together with screws.