1 / 3
Triquetra Fidget Spinner with one 608 Bearing — zdjęcie 1
1 / 3

Triquetra Fidget Spinner with one 608 Bearing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Triquetra-themed Fidget Spinner that only uses one 608 bearing. Great for smaller hands and pretty quick to print!

Ocena
5 / 5
Polubienia
20
Pobrania
152
Wydruki
2
Wyświetlenia
348
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I really wanted to see if I could turn the Triquetra into a fidget spinner (I've always loved that design).  I have some friends who are counselors and often have younger clients who tend to open up more when they have something to “fidget” with. So, I print out a lot of spinners for them and wanted to have some original designs that only use a single 608 bearing and fit those with smaller hands. 

I got great spin-time from a cheap 608 bearing off of Amazon. I'm sure there are a lot better bearings that could increase spin time, but the cheap ones worked just fine for me. The bearing caps are a remix that I came up with.

Note: The bearing is a tight fit. I use two pieces of wood to sandwich the spinner and bearing then press down until the bearing seats fully. It's not too difficult but does take a little effort.

Links:

Printing:

  • Supports: None
  • Infill: I recommend 100% to provide weight.
  • Layer Height: I use .16 but .2 should work just fine.
  • Material: PLA

Tagi