carabiner keychain mobile phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple small phone holder in slim design, keychain version simple, fast printing, key size, variable use.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
23.3.2025
update, added model v2_13mm_75°.
improves stability of 13mm version for phones in vertical position. Phone is more upright and does not tip over if you put a phone with a width of e.g. 11.5mm in the holder
Keychain Phone Stand
Created as a minimalist design, and easy to use as a keychain.
In horizontal position, just use one holder.
Using two holders in horizontal and vertical positions, the phone is stable. In the vertical position, you need to choose the correct holder size, 11mm or 13mm, otherwise the center of gravity is placed backwards and the phone may tip over.
Tested and photographed with a Samsung A55 phone in a transparent case in the 11mm version, I added a 13mm version for a larger case, in most cases the 11mm version will be sufficient. With the 13mm version, there may be a case where the center of gravity in the vertical position shifts too far back and the phone falls over, this is a compromise for the small dimensions of the keychain.
Print PetG
0,2mm structural
0,4n
5 perimeters
last layer 3 perimeters
top fill pattern monotone
overlap for layers 20%
botom 5 perimeters
top 3 perimeters
Sequential printing tested in the new PrusaSlicer
variable use
P220 sandpaper can be used to improve the appearance of the top layer
