1 / 4
Ender 5 Plus Nozzle Purge Bucket, Nozzle Brush, and Nozzle Wipe — zdjęcie 1
1 / 4

Ender 5 Plus Nozzle Purge Bucket, Nozzle Brush, and Nozzle Wipe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Purge Bucket, Nozzle Brush, and Silicone Wiper all in one for Ender 5 Plus with and without hydra

Ocena
5 / 5
Polubienia
26
Pobrania
188
Wydruki
1
Wyświetlenia
768
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Purge Bucket, Nozzle Brush, and Silicone Wiper all in one for Ender 5  Plus with and without hydra.  May fit on the Pro, but I have not tested it.  Uses a brass brush head and some 3mm thick silicone sheeting for parts. Bucket slides off with a dovetail attachment mechanism, or you can dump it through the removeable floor. There is a slot for a plastic window, which can be made from a 2L soda bottle.

PURGE BUCKET MACROS INCLUDED FOR EXAMPLE, BUT USE AT YOUR OWN RISK

Macros are for klipper firmware.

Tagi