Snap-in Silverware grid for Bosch dishwasher basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our silverware handles didn't fit in the factory slots so I designed this better grid
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Our silverware handles did not fit in the factory basket grid so I designed this one. Instead of three rows I did two rows with a third in the other direction that great for knives.
It snaps in for a good fit that won't come loose but also can be removed without having to reef on it. You can leave the original grid on in it's folded down position as shown in the photos.
Update: Added a second row of knife slots, look for v7 in the downloads
PLA WILL NOT WORK, it deforms in the dishwasher heat, I tested PLA, came out very deformed. I used ASA and it performs like a champ. I suspect PETG won't last. Prints without support. I used .25 layer height but anything should work.